Why your portable compressor needs an AeroKool Dryer
One of the major problems associated with portable compressed air is condensate. In the warm summer months, condensate in air lines and hoses wreaks havoc on air tools and downstream equipment. This causes premature tool failure and equipment malfunction.
During the colder weather, the condensate freezes, causing blockages which cannot be cleared without thawing out the lines.
Typical air treatments (gasses) to prevent freeze-up cannot unplug a frozen air line, and only contribute to the amount of harmful condensate which has accumulated and caused the initial problem. AeroKool Dryers resolve this issue by removing the condensate at it's source.
AeroKool Dryer OutsideEquipped with an air-blast pre-cooler/separator assembly, and desiccant cartridge type air dryer, the AeroKool Dryer removes condensate to a dew point as low as -40 degrees.
The AeroKool Dryer does not require power to operate and can therefore be operated remotely or mounted onto the tongue of your portable diesel air compressor. The air blast pre-cooler is powered by a fully adjustable speed air motor to ensure optimum operating temperatures to extend the life of the desiccant cartridge element.
AeroKool Dryers are available in 200 and 400 cfm configurations.